InCarTec 29-UC-050-VAUX Steering Wheel Control Interface ISO Adaptor For Holden And Vauxhall

Description

MAIN FEATURES

This Steering Wheel Control Interface to allow plug and play installation of an after-market head unit into a vehicle whilst maintaining use of the steering wheel controls. Steering control and stalk adaptors have a very simple but useful function – essentially, they enable you to retain the use of your steering wheel controls when you have an aftermarket head unit fitted, so you can control and enjoy your in-car entertainment exactly the way you want to. 

PLEASE NOTE: Each interface is compatible with a range of patch leads. An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please SEE HERE.

FEATURES:

• CANbus interface to maintain the steering wheel controls.
• This interface will also adapt from the quadlock connector in the car to standard after market ISO connectors.
• Provides a CANbus, powered antenna, ignition output, speed pulse, reverse gear signal and hand brake signal.
• This interface will also allow you to use the car’s original steering control buttons to access the original display screen to update the time and date settings.

VEHICLE COMPATIBILITY LIST

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.     

Vehicle fitment (guide only):

• Holden – Astra (AH) (2004 – 2009)
• Holden – Barina (XC) (2001 – 2005)
• Holden – Captiva 5 / Captiva MaXX (2006 – 2015)
• Holden – Tigra (XC) (2005 – 2006)
• Vauxhall – Antara (2007 – 2015)
• Vauxhall – Astra H (2004 – 2010 )
• Vauxhall – Corsa C (2000 – 2006)
• Vauxhall – Meriva A (2003 – 2010)
• Vauxhall – Signum (2003 – 2008)
• Vauxhall – Tigra II (2004 – 2009)
• Vauxhall – Vectra C Facelift (2005 – 2008)
• Vauxhall – Zafira B (2005 – 2014)

Please make sure that is the correct Steering Control Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.

Note: You may also require other accessories to fit your car stereo eg. fascia adapter or an aerial adaptor. You will not require an ISO stereo lead as it can be substituted for this steering wheel adapter. We stock the full range of stereo fitting parts, just ask if you need help.