Description
MAIN FEATURES
This adaptor is required to replace factory fitted amplified radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector and actives the factory on board Bose amplifier.
This allows the connection of an aftermarket HU to an OEM amplified system while retaining the OEM amplifier and connected speakers by adapting, matching or converting the output signals of the signal source to the signal input of the OEM amplifier. Depending on the vehicle and the installed OEM amplified system, various functions such as fader, sound or subwoofer settings might be lost. In individual cases, depending on the OEM system and the retrofit radio, increased noise or a switch-on or switch-off noise may occur.
Key Features:
- Allows the installation of an aftermarket head unit into a vehicle with an OEM amplifier
- Loose red is for +12v ignition power – must be manually connected
- Loose orange is for +12v illumination. This can be powered from the headlight switch or accessory.
VEHICLE COMPATIBILITY LIST
- Audi A3 [8P] (2003-2012)
- Audi A4 [B6/B7/8E] (2004-2009)
- Audi A6 [C5/B4] (2001-2006) **
- Audi R8 (2007-2015)
- Audi TT [8J] (2006-2014)
- Seat Exeo [3R] (2009-2013)
**Models with RNS-E factory Nav only
The above list of vehicles is a general guide and cannot be guaranteed in all cases.
Make sure you have this SPEAKER ISO connection type wiring harness in your car before you make your purchase as they can vary depending on the year of your car and also the model of the radio fitted.
Reviews
There are no reviews yet.